HEAT RECOVERY UNITS FOR COMMERCIAL AND SERVICE SECTOR

foto elenco prodotto

RXC/SE

HEAT RECOVERY UNITS WITH PLATE HEAT EXCHANGER

The recovery units of the RXC/SE series are available in 7 sizes, with nominal air flow rates from 400 to 4000 m3/h. The units have been designed for false ceiling installation (H) or ground installation (V) and are available in the ECO, PLUS, TOP configurations.
Go to product
foto elenco prodotto

RXC/HE

HEAT RECOVERY UNITS WITH PLATE HEAT EXCHANGER

The recovery units of the RXC/HE series are available in 7 sizes, with nominal air flow rates from 400 to 4000 m3/h. The units have been designed for false ceiling installation (H) or ground installation (V) and are available in the ECO, PLUS, TOP configurations.
Go to product
foto elenco prodotto

RXV/HE

HEAT RECOVERY UNITS WITH PLATE HEAT EXCHANGER

The recovery units of the RXV/HE series are available in 5 sizes, with nominal air flow rates from 400 to 4000 m3/h. The units have been designed for ground installation (V) with vertical air flows and are available in the ECO, PLUS, TOP versions.
Go to product
foto elenco prodotto

RXH/HE

HEAT RECOVERY UNITS WITH PLATE HEAT EXCHANGER

 These units, if installed on existing buildings, guarantee the energy requalification of the system through the management of the air change without additional charges; in the case of new installations, instead, the air change is completely carried out allowing to reduce the size of the main air conditioning system. In the intermediate seasons the building will benefit from free or partially-generated cooling from these units, which during the partial load phases allow the main system to operate with higher efficiency. These units also make it possible to guarantee support for the air conditioning system in the intermediate seasons using free-cooling or free-heating modes.

Go to product
foto elenco prodotto

RWH/HE

HEAT RECOVERY UNITS WITH ROTARY WHEEL

These units, if installed on existing buildings, guarantee the energy requalification of the system through the management of the air change without additional charges; in the case of new installations, instead, the air change is completely carried out allowing to reduce the size of the main air conditioning system. In the intermediate seasons the building will benefit from free or partially-generated cooling from these units, which during the partial load phases allow the main system to operate with higher efficiency.  These units also make it possible to guarantee support for the air conditioning system in the intermediate seasons using free-cooling or free-heating modes.

Go to product
Cookies help us to provide our services. By using these services, you accept the use of cookies on our part. Info